SETUP FT8 WITH N1MM LOGGER SERIAL
SETUP FT8 WITH N1MM LOGGER ARCHIVE
SETUP FT8 WITH N1MM LOGGER WINDOWS

Set up each port depending on what equipment is connected and enter the appropriate information.ДЄ more detailed explanation of each of the controls on this window follows.

SETUP FT8 WITH N1MM LOGGER SERIAL

The program supports up to 8 serial ports, each of which can be anywhere in the range COM1-COM99, and 3 parallel ports (LPT1 вЂ“ LPT3). If you do not have one of the items listed connected to a port, make sure the port selection is вЂNoneвЂ™ and the check boxes are not checked for that port. Set the values appropriate to your station. The Hardware tab is used to set up your radios, packet interfaces, telnet connections, CW/PTT/digital ports and the interfaces to other devices, such as SO2R controllers, multi-purpose interfaces, and keyers, if they require serial or parallel ports. You will see вЂњN1MM LoggerвЂќ with a Type of вЂњConfiguration SettingsвЂќ.

SETUP FT8 WITH N1MM LOGGER WINDOWS

If you have not unchecked вЂњHide extensions for known file typesвЂќ in Windows Explorer Options, you will not see N1MM Logger.ini. The N1MM Logger.iniВ file contains the name of the database file you were last using, which the program will load when it is started, as well as the name of the current contest and other recently-opened contests. You will need to export them from that database and load them into another database before they would show up there. That means, for example, that function key definitions loaded or modified when you are using one database will only appear in that database. ini file, but in the database that was in use when you loaded them. Function key definitions, telnet clusters, call history, and country information are not saved in the. Be careful in setting up items on the different tabs, to be sure that you understand that the option you are choosing is what you want.Д¬onfigurer settings are remembered by the program in the N1MM Logger.iniВ file, which is in the N1MM Logger+ user files area. The Configurer has many tabs with program settings influencing all aspects of the behavior of the program. The Configurer is our name for the tabbed dialog that appears when you click Config on the Entry Window top menu, and then choose Configure Ports, Mode Control, Audio, Other.

Setup DX, DXpedition, and General Purpose Contests.

Windows вЂ“ Table of Contents View (long).

Call History and Reverse Call HistoryВ Lookup.

SETUP FT8 WITH N1MM LOGGER ARCHIVE

Archive Files (1/2021) вЂ“ N1MM on WindowsXP.Clearing Rttyrite Sections from writelog.Once you have MMTTY set up in DI-1, you are now ready to Set up 2Tone in a Receive-only Digital Interface window.

Once you have MMTTY working, then go back to N1MM. The best way to troubleshoot is to close N1MM and open the standalone MMTTY program. If you are not printing the signal or see the presence of noise in the RTTY Engine 1В window, then something is not set up correctly. Note: With your radio on, tune in a RTTY signal. (If your radio is turned on and MMTTY has already been set up to receive on your sound card, you may see the presence of noise in the display and you may see random noise characters in the Digital Interface window. Drag it away from other windows so they donвЂ™t overlap. The familiar MMTTY control panel, called вЂњRTTY Engine 1вЂќ, should appear as shown in Figure 3-5. Go to the Interface pull-down menu at the top of the Digital Interface window and select MMTTY as shown in Figure 3-3. If the Main Entry Window is on top of the Digital Interface window, move the Main Entry Window away from the Digital Interface window so they donвЂ™t overlap each other. The Digital Interface (DI)В window opens up to MMVARI by default.

Setup ft8 with n1mm logger